The Firefox Privacy Guide for Dummies!

Facebook created same day Pentagon kills similar project

See the revision history at the end ... if you make it that far :)

Before embarking on this journey into the bowels of Firefox, you may want to first read, Tor verses a VPN – Which is right for you?. If you choose to use the Tor Browser, you need not bother with this guide.

Introduction

The following video will provide an overview of one aspect of what it is we're up against and why i wrote the Firefox configuration guides. I encourage everyone to view it, especially if you're one of the many people who aren't worried about surveillance because you 'have nothing to hide'.

Video: Prof Shoshana Zuboff on surveillance capitalism

You're aware that unethical companies such as Facebook, Instagram, Google, YouTube, advertisers, your ISP and even governments are spying on your activities and buying and selling the data they harvest, even if you may not be aware of how they're doing it. You're concerned about this invasion of your privacy, but what can you do abut it?

Welcome to the 'for dummies' edition of the Firefox Configuration Guide for Privacy Freaks and Performance Buffs!!!

The goal here is to provide a simple guide, to the extent that's possible, which will yield a privacy enhanced configuration of the Firefox web browser whilst breaking as few websites as possible. That said, be prepared to put a little bit more effort into your surfing activities, at least until the dust settles. The pay-off will be a much faster, cleaner, less annoying web that is less able to track and profile you. Note that i said "less", not "not".

WARNING: This guide is not intended for use with the Tor browser which is an already hardened version of Firefox. Configuring the Tor browser as outlined here may result in doom.

Catching the Fox

You want the standard release version of Mozilla Firefox; no Pale Moon, no Waterfox, etc., so if you don't have it, get it. If you run a Linux-based operating system, look in your package manager. Since it's privacy we're interested in, we're way too smart to be screwing around with Google Chrome or Microsoft Edge, though if you have an inferior alternative browser installed you could retain it as a backup.

Profiling the Fox

Start Firefox and enter about:profiles in the address bar -- you can call it the "location" bar or the "awesome" bar, i call it the address bar -- then press your 'Enter' key to load that address. This is where Firefox keeps a list of all your profiles. Profiles are where most of your settings, bookmarks and other junk gets stored.

Firefox Profile Manager
click me

You can have as many profiles as you want, but by default there will be just one named 'default'. We need another one, so click the 'Create a New Profile' button and name the new one 'privacy'. You can change the name later, but leave it be for now. Once you're done, exit Firefox.

Firefox will now annoy you (and let it keep annoying you for the duration of these next few months we'll be spending together) by asking which profile you want to load every damned time you start it and you should (almost) always choose your 'privacy' profile.

Pro Tip

There are many 'about:' pages in Firefox, but not all are accessible from the various menus. To see some of those that aren't, enter about:about in the address bar, but be careful what you mess with in there!

Training the Fox

Firefox Profile Manager 2
click me

Restart Firefox and this time you should see the Choose User Profile window. Load your privacy profile but don't visit any web pages just yet, other than this one if you want. Firefox may load some default pages when is starts and that's something we'll fix later.

Profile Tip

If you don't want Firefox whining about which profile to load every time it starts, you can select your preferred profile and check the 'Don't ask at startup' option, but don't do that yet! Another way is to create a shortcut to load any profile you want.

For more about profiles, see Use the Profile Manager to create and remove Firefox profiles and Multiple Firefox profiles.

For more about ticklish penguins, go here.

 

If you're running Windows you will need to un-hide file extensions, and i suggest you keep them un-hidden.

With Firefox up and running, load about:preferences in the address bar or click the Hamburg icon on the toolbar, then 'Preferences'. Click the 'Search' menu item on the left and under where it says 'Search Bar', click 'Add search bar in toolbar'.

Next, go to the arkenfox/user.js GitHub repository. We need their prefsCleaner.bat (Windows) or prefsCleaner.sh (Linux) file and the updater.bat (Windows) or updater.sh (Linux) file. Now before you mess up, hear me out: One by one, click on the file names, then click the 'Raw' button, then press Ctrl+S to save the files to your desktop. Failing to heed my advice can cause the file to get messed up which will surely result in Russia nuking us ... assuming you live in the U.S.. If you want to avoid those steps, here's the direct links to the files: updater.sh (Linux), updater.bat (Windows), prefsCleaner.sh (Linux), prefsCleaner.bat (Windows). Now if you're one of those wiz kids, you may have deduced that we're going to need that user.js file too but we'll grab that another way.

Next, go to the 12bytes.org/Firefox-user.js-supplement page at Codeberg.org, click the user-overrides.js file, then click the 'Raw' button and press Ctrl+S to save the file (here's the direct link to the raw file).

Next you'll need a decent code editor (no, not Notepad!) with syntax highlighting. If you're running Wintendo (that's one of my several derogatory names for Windows), PSPad is nice, simple and free. If you're running Linux you've surely got something installed already, so poke around.

What you need to do now is open that user-overrides.js file in your code editor and follow the directions Very Carefully. Every single little tiny thing you could ever possibly want to know about all the settings in that file is in there (except whatever i forgot to put in there).

Now that you've sifted through that convoluted mess (go you!), open Firefox's about:profiles page again. Note that user profiles and web cache are stored in separate folders, thus why you may see more than one directory path for each profile. In the row labeled 'Root Directory' under your 'privacy' profile, click the 'Open Directory' button and then kill Firefox.

In your file manager you may notice that the folder containing your 'privacy' profile actually has a longer name with a bunch of gobbledygook in front of 'profile'. Ignore that like you ignore your goofy neighbor with the tinfoil wallpaper. If you see a prefs.js file in there, you're probably in the right place. Next, grab those files from your desktop you pirated earlier and stick 'em in your 'privacy' profile folder where the prefs.js file is.

Now we need to run that updater script. How to do that depends on whether...

...you're running Linux

You will need to make those .sh files executable. You could try meditation or sacrificing a goat, but it'd probably be quicker to just right-click on each of them to open the file properties dialog window and click the 'Is executable' checkbox on the 'Permissions' tab (or similar). If your file browser doesn't have such an option, see How do I run .sh files?.

We need to run that updater.sh script from a terminal, so open one and change the directory to your 'privacy' profile directory where the updater.sh file is. In the example below you'll need to change 'gobbledygook' to match the correct name of your profile folder:

cd ~/.mozilla/firefox/gobbledygook.privacy/

Now run the updater.sh script by preceding the file name with a dot and a slash:

./updater.sh

 

...or Windows

To run that updater.bat script, navigate to your Firefox profile directory, hold down the Shift key and right-click in an empty space where the file is, then select "Open Command Window Here". Enter updater.bat and hit Enter. If you have trouble, see How to Run a BAT File on Windows: 13 Steps (with Pictures).

 

The updater script will spit out some introductory stuff and then prompt you to continue. If by chance everything in the universe is aligned just so, and you've followed the directions you didn't read, the script will download a fresh copy of the 'arkenfox' user.js file to your profile directory and append the contents of your user-overrides.js to it just like it says on the tin.

Pestering the Fox

The 'arkenfox' user.js is updated fairly frequently and so you'll need to check for updates regularly. There's two ways you can check for updates if you're running Linux and one if you're running Windows, however there's only one (easy) way to actually update the user.js and that's by using the 'arkenfox' updater script.

user.js-notify script message (Linux)If you're using a Linux-based OS you can use my user.js-notify.sh script to be automatically notified via a desktop notification when:

  • the 'arkenfox' user.js is updated
  • my user-overrides.js is updated
  • this guide is updated

The idea here is to add the script to your startup programs so it runs each time you log-on to your desktop. Instructions for implementing the script are contained within the script. Open the file with a code/text editor to read the instructions and edit a few options.

To check for a new user.js if you're running Windows, or to actually update the file, kill Firefox and run the 'arkenfox' updater script. If you're running Windows, or if you're running Linux and don't wish to use my user.js-version-checker.sh script, you should run the updater script every week or so in order to check for a new version. You always want the user.js version that corresponds to the major version of Firefox, so if the updater script says Available online: * version 80-alpha and you're running Firefox version 79.0.1, you'll want to cancel the update because 80 doesn't equal 79, unless you're "woke" in which case it all bets are off.

Each time you run the updater script, be sure to follow it up by running the prefsCleaner script using the same method as described earlier for your operating system. The prefsCleaner script will reset any depreciated, removed, or inactive preferences and it's important that you do this.

updater script Pro Tip

If you use Linux you can run the script with the -c switch (./updater.sh -c) which will create a 'diff' file that will list all the differences between the old user.js and the newer one.

To see all the options for running the updater script for both Linux and Windows, see the Updater Scripts article on the 'arkenfox' wiki.

Fattening the Fox

Now we're going to go to the Firefox Add-ons website, AMO (Addons.Mozilla.Org). Start Firefox and select your 'privacy' profile, then come back here.

Why does he say 'WE' and 'WE'RE' when 'I' am the one doing all the f'n work?!

Plausible deniability. If i screw something up that causes your computer to explode, it's your fault.

 

One at a time, middle click each of the links below to open their pages in a new tab, then Read What It Says for each add-on and install it. If by chance a particular add-on is not available for some reason, let me know and don't install something you think is equivalent because it probably isn't.

Once you have all those installed, find the 'Customize' option in one of the Firefox menus or by right-clicking on an empty space on a toolbar somewhere. With the exception of uBlock Origin, you can drag the toolbar icons for the other add-ons, for those that have them, to the Overflow Menu since you will rarely be interacting with them.

A note regarding add-ons...

More add-ons = more bad (generally speaking).

It's pretty important, and especially so if you're new to the game, to NOT install add-ons willy-nilly. The more you install, the more likely things will break and that your privacy will be compromised, so DON'T GO OVERBOARD with add-ons.

The selection of recommended add-ons in this guide accounts for not only how your privacy and browsing experience is affected, but also how they interact with each other as well as with a Firefox that has been extensively modified by the 'arkenfox' user.js. If you install certain additional add-ons that you *think* will guard your privacy, you could very well wind up with an opposite result. In particular, stay away from any User-Agent spoofing add-ons.

Firefox has built-in mechanisms which help to prevent browser fingerprinting and safeguard your privacy. Alone they are not enough, which is why you fell into this pit of despair, but they do cover some very important ground.

For more on the subject and what to look for when considering add-ons, see Firefox Extensions – My Picks.

 

We need to configure some of the add-ons we installed, but first a word to the wise: Unless you know what you're doing, i strongly suggest you configure these add-ons as outlined here, else Russia.

To configure your add-ons, load about:addons in the address bar or find the 'Add-ons' menu item in one of the Firefox menus.

Clear URLs: In the preferences, enable the following options where an [X] indicates the option is enabled:

[_] Allow domain blocking (if you're not using any of the major ad filtering lists in uBlock, then enable this).
[X] Skip URLs on local hosts
[X] Prevent tracking injection over history API
[X] Block hyperlink auditing
[X] Filters ETag headers from requests

The rest of the options are just that; optional :)

Footnotes:

[1] Enabling this will enhance privacy, however this option will break some websites.

Cookie AutoDelete: On the 'Settings' page, click the 'CAD Settings' tab and enable the following in the 'Automatic Cleaning Options' section:

[X] Enable Automatic Cleaning
[X] Enable Cleanup for Discarded/Unloaded Tabs
[X] Enable Cleanup on Domain Change
[X] Enable Greylist Cleanup on Browser Restart
[_] (optional) Clean Cookies from Open Tabs on Startup
[X] Clean All Expired Cookies

In the 'Other Browsing Data Cleanup Options' section, enable all options.

The rest of the settings are optional.

While Cookie AutoDelete (CAD) may seem a bit complex at first, it's really very easy to use. Given the combination of the 'arkenfox' user.js, my user-overrides.js and the suggested CAD settings, you'll pretty much be able to ignore CAD and get on with your life. The exception will be when you need (more so than 'want') to save some sort of data for some website, like if you want to log-on automatically even after you restart Firefox, or you want to save your settings for a search engine website. In these cases you will click the CAD toolbar icon and either greylist or whitelist the domain or the domain and all its subdomains. Read the CAD documentation and FAQs to learn how to do this.

uBlock Origin: This is a huge biggie! I know, supposed to be the 'for dummies' guide and all, but you really gotta learn how to use uBlock Origin (uBO). The good news is that it's got a 'dummy' mode and it's enabled by default!

To set up uBO, read my uBlock Origin Suggested Settings guide.

Of particular importance, DO NOT select the 'I am an advanced user' option! Don't look at it. Don't think about it. Don't think about looking at it ... at least not until you read all that 'required reading' stuff and understand fully what uBO is, does, how to configure it, and how easy it is to break the entire interwebs if you screw up.

Now it's really important that you read this and this and this, but only up to the 'Medium mode' part for the last one. Once you complete that you'll be a Semi-Certified uBlock Origin Web Filtering Engineer Apprentice.

Break time...

Training the Foxineer

With that all done and Firefox running, close all tabs and click the Hamburger button again to open the Preferences window, then click the Privacy & Security menu item, or load about:preferences#privacy in the address bar. Scroll down to the Cookies and Site Data section and click the Manage Data button. In the Manage Cookies and Site Data window that opens, click Remove All. This will remove (almost) all of the stored data that Firefox has accumulated so far. We're just doing this to nuke anything that was stored before we installed our privacy add-ons, plus so that you know how to nuke Firefox storage.

A question i get allot...

Q: If i mess up my Firefox profile, maybe by accidentally enabling JavaScript when for a website where i shouldn't have, should i reinstall Firefox?

A: No. The only thing you would achieve is to reinstall the same identical files that make up the core of a Firefox installation while leaving your profile, where most web related data is stored, intact, so there's no point. What you can do in a worst case scenario is save what you need from your profile (bookmarks, passwords, etc.) and then nuke the entire profile after which Firefox will generate a new one. This is a rather extreme and probably unnecessary action to take however when instead you can simply nuke all of Firefox's storage.

 

If you've used Firefox before there's going to be some changes, one of them being that you'll be searching from the search bar (or a web page that isn't Google hopefully) instead of the address bar. The reason for this is a little creepy, suffice to say it's a privacy/security thing. Live search suggestions will be disabled because it's also a creepy thing, though the search bar will still suggest stuff from your history, bookmarks and previous searches.

Now for the really important stuff...

Remember the part at the beginning when you started reading this last week? You know, where i said we'd be "breaking as few websites as possible"? Kek! Since we disabled JavaScript globally with uBO, every other website you visit is going to be busted, and for good reason too.

There's a few things you need to know about JavaScript: 1), it's awesome-ish, 2) it's a privacy nIGhTMarE, 3) almost every website on Planet Earth uses it (even this one).

JavaScript (JS) can be used to do all kinds of cool (and creepy) things like make web pages interactive, make dull things look un-dull, animate stuff, etc.. It's used a lot for making navigation menus work and displaying images, as well as for annoying the bejeezes out of you with ads and pop-ups and it's almost always necessary when shopping. Of primary importance however is the fact that JS is also leveraged heavily for tracking and profiling you, your web browser, your computer, family history, bathroom habits and the masturbation techniques of your family pet, and thus it's a privacy (and, to some extent, security) nightmare (if you want to beat yourself up even more, read Stop pushing JavaScript! by a guy who knows what he's talking about).

Now do you see why we disabled JS globally for the entire web? Thing is, it's very easy to enable again For Those Specific Websites Where You Really Need It to be enabled. "Need", i said. Not "like" or "want", but "need".

Start Firefox and load up your privacy profile, then middle-click this link to open it in a new tab and click some of the colors on the color swatch and…… well that was boring, but WAIT! THERE'S MORE! Now click the uBlock Origin button on your toolbar and in the lower right corner there’s an icon that looks like a </>, except it has a red ‘X’ through it. That icon is secret code for [CENSORED]. Click it to remove the ‘X’ and you will have enabled JavaScript for that particular domain after which you’ll see a new button appear out of thin air that has circlely arrows on it. Clicking that button (or pressing F5) will refresh the page at www.w3schools.com and this time your browser will allow JS to run for the entire w3schools.com domain. That color swatch page will now look very different and this time when you click the colors, awesome things will appear that will surely dazzle you for hours on end (like that damned triangle puzzle-peg thingy in every Cracker Barrel).

The point of that intensely interesting exercise was to demonstrate the power of JavaScript by showing you how different it can make a website look and work, as well as how necessary it is in some, but not all cases. For example, if you're reading this nail-biting novel with your Firefox privacy profile loaded and JS disabled, it wouldn't make much of a difference because the place looks and works pretty much the same whether JS is enabled or not, thus you should never enable it where it isn't needed. Kapish?

Now you're going to take the JavaScript Oath with me. DON'T LAUGH, this is important shit! OK, repeat after me:

EYE SHALL NOT ENABLE JAVASCRIPT FOR ANY WEBSITE UNLESS A) THE WEB DEVELOPER IS AN ETHICAL BLOOD RELATIVE WHOM I TRUST WITH MY LIFE AND B) IT MUST BE ENABLED IN ORDER TO PROVIDE REQUIRED FUNCTIONALITY THAT WOULD OTHERWISE NOT BE AVAILABLE (AND LOOKING AT BOOBS DON'T COUNT!).

Importing stuff from an old profile

If you're not a first-time Firefox user and you have important bookmarks or other stuff you want to import to your new privacy profile, make a backup copy of your profile and then go ahead and read this.

What to do when the Fox bites

It's inevitable that you're going to have trouble with some websites. Keep calm. Breeeeath! You've already gotten a taste of how a website can be rendered useless with JavaScript disabled and although i let you enable it for the site given in the example earlier, i only did so because it's a trustworthy place. The next website you visit may not be. You're here aren't you?

To make a broken website function again, you'll need to use uBlock Origin to enable the functionality you need for those websites you trust. If you cannot get a website to cooperate by making site specific changes in uBlock, you can always spin-up a fresh, empty profile, but understand that you will be at the mercy of a completely default Firefox configuration with all of our extra privacy protections removed. For websites you don't trust, why are you visiting them? Porn? Warez? If you value your privacy and digital integrity, forget that stuff. Seriously.

Another 'gotchya' that will likely creep up at some point is a website not saving settings that you wanted to save, such as your log-on credentials or search engine settings. To save this data you will need to edit the permissions for the domain and there's two easy ways to access them; you can right click within the page to open a context menu, then click the "View Page Info" menu item, or you can click the padlock icon in the address bar, then the right-facing arrow, then "More information". In the window that opens, click the "Permissions" icon and scroll down until you see the "Set Cookies" item. Finally, deselect the "Use Default" preference and select the "Allow" preference to keep your settings for the website after Firefox is closed and restarted.

I would NOT suggest allowing cookies for any privacy-hating social media or mainstream search websites such as Google, Yahoo, Bing, Facebook, Instagram, Twitter, etc.. If you want to learn more about alternative search engines, read Alternative Search Engines That Respect Your Privacy.

The Fox hole

Even with everything we've done, you're still vulnerable to being tracked and profiled, however you're in a better position now then when you started out, except for one little problem: Your Internet Service Provider!

At the very least your ISP can see what websites you visit, when you're surfing the web and when you're not. They may even inject ads, malware or other garbage in your data stream. The solution: Hijack your neighbors unprotected WiFi and... Kidding! Listen, you and i have gotten to know each other throughout this long and difficult ordeal. We're kinda like buddies now. Kinda. And i can already tell you're ethics are of a higher caliber than mine that!

One solution to the problem is a Virtual Private Network (VPN). Ever wanted to be in 30 places at once?

A VPN works by encrypting the traffic between you and another computer run by the VPN service provider which we'll call an 'exit node'. That exit node could be anywhere in the world. From the exit node your traffic flows as normal to whatever website you want to visit and the website then sends the kitty video you clicked on back to the exit node thinking IT is YOU, but alas, IT AIN'T! YOU FOOLS! The kitty video then secretly makes its way back to you through this secret tunnel which was secretly established between you and the exit node. So far as the website is concerned, it doesn't know where the hell you really are and so far as your ISP is concerned, all it sees is gobbledygook that looks like Braille to a quadriplegic tuna. Ever annoyed by that galactically stupid "Sorry, this video is not available in your country" crap? Pfff.

There are truck loads of different VPN service providers and it seems the vast majority do not take customer privacy seriously, however i think both NordVPN and AirVPN are good companies that offer a good service at a good price. I've used both and i like both. Both have servers (think 'exit nodes') all around the globe and neither restrict any protocols (think 'BitTorrent'). Both offer client applications that you can install to make using their service stupid simple. If you'd prefer to pick a VPN provider yourself however, i recommend you visit That One Privacy Site and browse the fantastic spreadsheets the dude puts together. Another good resource is TorrentFreak's annual VPN reviews. Here's the one for 2018. I would strongly advise against any VPN add-on on the Mozilla add-ons site for a few reasons, one of them being that they very likely suck from a privacy perspective and another being that it's only your browser that will benefit and not the rest of your OS and software. Lastly, NEVER trust any "free" VPN provider. Ever.

The downside?

  • Though VPN services are cheap, it's still an additional expense
  • VPN exit node IP addresses can get blacklisted which could cause problems sending mail and accessing certain websites and services, however in my experience this hasn't been a huge issue and, even if is is, it's usually just a couple of mouse clicks to switch exit nodes
  • Latency (the time between the mother-in-law walking in front of your car and your realization that you need to slam on the breaks) and bandwidth (how many tweets per second you can send notifying your friends of the "accident") will be affected, but in my experience the difference isn't huge

In short, i think the pluses of using a VPN outweigh the minuses. That said, you can never trust any VPN service 100%, but any reputable one will help to protect your privacy and should certainly prevent your ISP from spying on you. If it's the NSA you're worried about, well, that's another story, but i'm not at all convinced there's any way to thwart that threat.

WHAT THE FOX!

So now you're all smitten thinking you're invincible and ready to hack NASA to see if aliens really built Taco Bell's on the back of the moon (they did, sorta, pretty sure). You're not, but you've taken one, small step for man, and..... Truth is, there are far more vectors for attack than you and i and the so-called "experts" may ever know about, so don't get all uppity. Perfect privacy on the web, as in real life, is a pipe dream and it wasn't the goal here anyway. We've covered some important bases that will help prevent nasty corporations and your ISP from spying on you, but not all of them. Remember that when you're creating fake profiles on Facebook to stalk your ex.

After you've taken plenty of time to get comfortable with your new Firefox configuration, i suggest reading everything in the uBlock Origin wiki and learning how to use it in its advanced mode. And after that, it's the Firefox Configuration Guide for Privacy Freaks and Performance Buffs.

Be safe. Be ethical. And if you need help (after you've tried to help yourself), leave a comment or check the FAQ: Firefox Hardening page.

IMPORTANT: If you incorporate suggestions made in this guide, please subscribe near the bottom of this page so you can be informed of updates. This article is updated fairly often and that's the best way to stay informed.

Further resources

Revisions

Click to expand...

13-Jun-2021

  • minor edits, typos

20-Oct-2020

7-Oct-2020

  • added more info about the user.js-notify.sh script

27-Sep-2020

  • reversed the order of this change log so newest changes are at the top

26-Sep-2020

  • well, that didn't last long - after more testing i reinstated Cookie AutoDelete because i think it's easier to use it than it is to be adding cookie exceptions all the time, plus no CAD breaks session restore with the 'arkenfox' user.js and there are other quibbles as well
  • removed Privacy-Oriented Origin Policy - given its limited usefulness, non-noob friendly filter syntax and potential to break a site on rare occasions, i decided it wasn't needed
  • minor edits

24-Sep-2020

  • removed all Cookie AutoDelete add-on info - given the intended audience for this guide, as well as first-party isolation and resist fingerprinting being enabled in the 'arkenfox' user.js, it isn't needed
  • removed all LocalCDN add-on info - given the intended audience for this guide, as well as first-party isolation and resist fingerprinting being enabled in the 'arkenfox' user.js, it isn't needed
  • added instructions for keeping storage items (log-on credentials, settings) for websites
  • minor edits

12-Sep-2020

  • split off part of the 'Fattening the Fox' section into a new section, 'Pestering the Fox', which includes new info about how to automatically be notified when a new version of the 'arkenfox' user.js is available (Linux only)

25-Aug-2020

  • replaced Site Bleacher with Cookie AutoDelete (CAD) - search for "Cookie AutoDelete" to see the edited content
  • minor edits

18-Aug-2020

  • added more info about the 'arkenfox' updater script regarding keeping the user.js version in sync with the major Firefox version

16-Aug-2020

  • minor edit

31-Jul-2020

  • removed the 'Don't touch my tabs!' add-on (obsolete since Firefox v79)

26-Jul-2020

  • replaced Decentraleyes with LocalCDN

5-Jul-2020

  • added the video, Prof Shoshana Zuboff on surveillance capitalism

24-Apr-2020

  • updated the URL for the uBlock Origin Suggested Settings Guide

21-Mar-2020

  • removed ETag Stoppa since ClearURLs covers eTag storage filtering
  • added settings details for CLearURLs

24-Jan-2020

  • added more info about circumventing website logon problems due to Site Bleacher add-on
  • minor edits

23-Jan-2020

  • removed 'Font Fingerprint Defender' add-on - i got word that the extensions may be problematic

22-Jan-2020

  • removed 'First Party Isolation' add-on
  • added 'Font Fingerprint Defender' add-on
  • minor edits

4-Jan-2020

  • added ETag Stoppa to extensions section
  • added link to 'FAQ: Firefox Hardening' page
  • minor edits throughout

3-Dec-2019

  • minor edit

15-Nov-2019

  • added a more extensive warning about installing add-ons in addition to those recommended herein

13-Nov-2019

  • misc. edits and clarifications, nothing too drastic

6-Nov-2019

  • stuck the uBlock config stuff on its own page

5-Nov-2019

  • rewrote several bits of the guide in an attempt to clarify things and make it a bit shorter
  • edited some content to bring it up to date with the newest version of Firefox
  • adjusted settings for uBO

27-May-2019

  • added a warning about using this guide with Tor
  • added a resources section

23-May-2019

  • added instructions for enabling the search bar in the navigation bar since setting the preference alone in user.js doesn't work for some reason
  • minor edits

29-Apr-2019

  • added HTTPZ
  • added Site Bleacher and associated information
  • removed temporary profile info
  • lots of minor edits

29-Feb-2019

  • minor edit

22-Jan-2019

  • added better description and screen-caps for how to download user-overrides.js
  • minor edit

12-Jan-2019

  • clarified info regarding the downloading of the configuration files

6-Jan-2019

  • clarified a lot of stuff that may not have been clarified clearly enough
  • eliminated the 'relaxed_user-overrides.js' file - the user-overrides.js is now used for both the advanced and dummy guides
  • updated the user-overrides.js file
  • lots of minor edits, corrections

29-Dec-2018

  • polishing, clarifications

27-Dec-2018

  • added more info about using the user.js updater and prefsCleaner scrips
  • many small changes and polishing

26-Dec-2018

  • first (pre) release

Comments

Note that both reader and my comments, while they may have been accurate at the time, might be inaccurate today. This is a highly dynamic environment so please verify the accuracy of comment content should you wish to utilize it. Failing that, ask me and i'll give it a crack.

84 thoughts on “The Firefox Privacy Guide for Dummies!”

  1. Thank you so much man, keep it up!
    It helps a lot and after some testing, coveryourtracks from eef. says still that my fingerprint is nearly unique but i guess, thats just a misstake becouse of good privacy? I am not that well known in all that, but still care for privacy and fear google amazon etc.

    So thanks!

  2. First of all I want to thank you very, very, very much, for writing these guides and helping us privacy noobs to bolster and ground us against the exploatators. The pinch of humor in the article helps digest the subject matter better and again I’m very grateful for your effort.

    But! there is a little problem I run into and I’m kinda clueless how and what to do.
    For our classes we have to use Cisco Webex and sometimes Zoom, the problem is I’m not able to connect via audio to the session. Now I tried tweaking it in the user.js and prefs.js files by disabling some user prefs like:
    (“media.getusermedia.audiocapture.enabled”, false)
    (“dom.webaudio.enabled”, false) and setting the cam and mic permissions to 0; and I did really come further, in the way that Webex recognises and offers me to not connect via dialing the number, but to click and connect audio on my computer. Now the problem is that when I do that I’m shown that the connection is in progress, but nothing more happens, so I’m kinda in a connection loop.
    I tried inspect Element and looking after some hint where the problem is, but honestly I have no idea what to look after… So I’m asking for some help, at best you tell me what user_pref should I change, to make it work.

    Sorry for bothering you with such long comment and again thanks for such comprehensive guide! I was long time trying to understand and handle my privacy online and your was that little-big that I needed. Keep it up!

    1. thanks much for the kind words

      the first step to solving your problem is to determine whether the issue is caused by an extension or the user.js – create a fresh profile and copy a default user.js to it and see if the issue is solved, in which case you’ll know an extension is causing the problem (i don’t know if you’re running uBlock and/or uMatrix)

      if the issue is not solved then the user.js is a likely cause – if you search for ‘zoom’ on the arkenfox repo issues you’ll find this – maybe that will solve both problems??? i don’t know as i don’t use either of those programs

      if that doesn’t help you, let me know and we’ll go to the next step

      1. I was kinda busy and forgott to respond and I just came back to say thanks for the provided link and help, since the problem was indeed caused by the modifications in the user.js file.
        Now I’m not 100% sure which one was it, but Zoom and Webex now allow me to listen to the classes and watch the shared screen presentations, even though in Zoom my own webcam appears having some issues (if someone got the problem, you can find more about it on the provided link), but for myself this comes handy, since I dont like being showing myself online anyways…

        Cheers and Godspeed with this project!

  3. I now have multiple profiles for various purposes but every time I start Firefox it always loads my default one, that fancy profile manager of yours is nowhere to be seen. This happens both on Windows and on Debian actually, how do I make enable it?

    1. > that fancy profile manager of yours is nowhere to be seen

      not sure what you mean – i never created a profile manager

      to have Firefox ask which profile you want to use when it starts, add -P to the command – see here for more – if you need more help, let me know

Leave a Reply to BG Cancel reply

Your email address will not be published. Required fields are marked *